Stainless Steel Mould Laser Welding Machine Laser Soldering System For Mould Repair With CE
Introduction
Equipped with industrial touch screen control system, the welding joints diameter is only 0.2-0.5mm. No deformation and the material can be etched without any damage. No trachoma, no stomata with smooth welding edge. You can re-use the original mold after repair, which will greatly improve efficiency and reduce cost.
Feature
Energy, pulse width, frequency and faculae can be adjusted within a wide range to achieve different welding effects.
The parameters are adjusted by the control rod in the sealed cavity, simple and efficient .
Ceramic focusing cavity imported from the U.K. is employed, corrosion resistant, high temperature resistant, efficient in optical/electrical conversion.
The focusing cavity's service lifespan is 8 to 10 years, and the service lifespan of the Xenon lamp is over 8 million times.
Personalized design in compliance with ergonomics principle.
Main Function
Laser control system: Mold laser spot welder is under the control of double closed loop by inside improved industrial controlling micro-computer so the stability and the running ability surpass products that controlled by monolithic integrated circuit. The laser controlling system can control the power source profile precisely pre-set optimized.
Gas protecting system: synchronous argon protecting system controlled by micro-computer act better, it make the welding connection even firmer and artistic. Being controlled to keep synchronous transmission with laser can save the argon at the highest level.
Observing system: It's equipped with special-purpose microscope observing system with cross cursor. It has high speed electron flitting device to protect the operator's eyes from being hurt.
Application & Material
Widely used in die repair and metal parts repair, can weld a variety of die materials: S136, NAK80, 718, 738, P20, SKD-11, SKD-61, H13, W302, GS2344, GS2343, GS2082, etc.
Parameter
| Laser power |
300W |
400W |
500W |
| Laser Source |
Pulsed Nd:YAG |
| Pulse Width |
0.3-20ms |
| Pulse Frequency |
0.1-50Hz |
| Beam Diameter |
0.1-3.0mm |
| Filler Wire Diameter |
Max 0.6mm |
Max 0.8mm |
Max 1.0 mm |
| Cooling System |
1P water chiller |
2P water chiller |
3P water chiller |
| Power Supply |
220V50Hz
(60Hz optional)
|
380V/50Hz
(60Hz optional)
|
380V/50Hz
(60Hz optional)
|
| Power Consumption |
9KW |
14KW |
16KW |
| Observing System |
Microscope 10X |
| 3 axis of table |
X=250mm, Y=100mm, Z=200mm, XY manual, Z electrical |
| Data Memorization |
100 groups |
| Illumination |
LED ring lights |
| Language Display |
English & Chinese |
| Shield Gas Supply |
One line quick connection (argon) |
Product Tags:
|
|
500W Automated Laser Welding Machine / Laser Soldering Equipment CE Approval Images
|
